StormTech Systems : Designed and Built to Survive Severe Wind
back

2-Panel Shearwall System

A two panel assembly, when anchored into concrete or pier mount, not only increases the uplift value, but the lateral shear of the wall as well.

3-Panel Shearwall System

The three panel assembly provides an increase in lateral shear strength that is unequalled by any combination of products used in construction today.

back

Shearwall System

Stormtech Systems is proud to offer our patented mult-panel shear wall system which increases wall strength up to 86% as a result from NAHB research center testing.

Shearwall System - Key Advantages

  • Designed to work in conjunction with our roof cable tie down system
  • Ease of installation makes the panels nearly impossible to install incorrectly
  • Eliminate the need for additional exterior or interior structural sheathing
  • Versatility given to the architect /engineer
  • Panels are designed to be stacked from floor to floor
  • LVL Panels give never before available uplift and lateral shear value to LVL’s
  • Savings on both labor and materials
  • Can increase the strength of a structure and decrease the building time
  • Unequalled strength for lateral shear and uplift
  • Cost effective

STS 2-Panel

  • Uplift capability = 13,000+ lbs
  • Lateral shear capability = 13,000+ lbs
  • Increased test wall strength by 34%.

STS 3-Panel

  • Uplift capability = 13,000+ lbs
  • Lateral shear capability = 18,000+ lbs
  • Increased test wall strength by 86%.

EasyInstallation

  • 16 Connection points per panel
  • Multiple Anchor positions
  • Lag screws and bolts - NO nails

Standard panel heights - 92 5/8", 104 5/8", 116 5/8" (custom sizes by special order)